If you are receiving Mode-S ADS-B position reports, PlanePlotter can interface to Google Earth to display aircraft positions over the Google Earth base map. Note: UserTag must either be “$A…$Z”, relating to Nic Storey’s PlaneSymbol v3 assignments, or “Seen” (case-sensitive) if using e.g. It can even give you a dynamic real-time view from the flight deck of an aircraft that you designate. ADU SoftwareĪircraft marked as “Interested” in your BaseStation.sqb database may be highlighted in a custom colour by going to Settings→Planes and selecting Colour Interested. The performance effect of BaseStation.sqb can be minimised by removing redundant database columns and tables for PPm – the difference can be significant! However, the columns used are subject to change in future updates, so please carefully read each PPm release announcement.Īny changes to the database should be made after completely closing PPm – i.e. Use the download option within Planeplotter (Options/Script/Fetch Latest Flight and Route. pressing the Back button and confirming that you want to exit PPm. COAAs PlanePlotter servers are polled every 30 seconds, with Plane positions estimated based on the latest information available. The FAA CIFP (Coded Instrument Flight Procedures) file that went into effect on Novemis now available. The servers are re-queried upon change of Map region. Failure to do so may result in the app crashing, or old BaseStation.sqb / FlightRoute.sqb data being displayed. The planes listen to the GPS system to figure out where they are.
Planeplotter basestation.sqb android#
Third-party airline operator flags and airplane silhouettes may be placed into the folders specified, and will be displayed in the Map, Table and Info Views.Īs this involves the downloading and unzipping of archives involving potentially thousands of graphics, it is recommended that the files are unzipped on PC / Mac and then transferred to your Android device over USB.Īndroid devices often ship without a file manager. Lots of people set up ADSB receivers, and aircraft position data became an easily.
Planeplotter basestation.sqb serial#
PlanePlotter can process serial (or virtual serial) data from a local GPS receiver to correct the Home location and, if desired, to centre the chart/outline. The on-board u-blox M8 GPS receiver provides position and time information needed for data validation. If such an application is required, the excellent and free ES File Explorer is recommended. The device is configured as NTP stratum 1 time server to provide high accurate time also in local network. The embedded web application allows monitoring of traffic in various ways. Stored map data on the device allows operation in offline mode.
0 kommentar(er)
